Citabria

Sýnið hvað þið eruð að smíða eða setja saman
Svara
Passamynd
Steinar
Póstar: 180
Skráður: 8. Jan. 2006 22:47:28

Re: Citabria

Póstur eftir Steinar »

Er búinn að vera að dunda mér við að líma saman eina Citabriu. Kittið er frá Lanier.
Hér eru smá upplýsingar frá framleiðanda.


NOTES FROM OUR TECH DEPARTMENT
This is the 90% Pre-Built, Radio Controlled, Glow Powered,
Almost-Ready-To-Fly Lanier Citabria .40 Sport Airplane.
For Intermediate to Advanced Modeler/Flyers.

FEATURES: Balsa, plywood and fiberglass construction.
Balsa and plywood, built-up fuselage.
Balsa and plywood three-piece wing construction.
Balsa sheeted foam fuselage.
Iron-on adhesive backed plastic covering pre-applied. The bottom
half of the fuselage and the cowl is covered in white, the top
half is covered in red and separated by two blue pinstripes. The
wings and fiberglass wheel pants are solid red.
Easily accessible plywood radio tray.
Pre-painted fiberglass cowl.
Clear canopy.
Dural aluminum landing gear with 2" (52mm) foam wheels.
Pre-formed 1/16" (2mm) wire tail gear with 1" (26mm) tailwheel.
Dual aileron servos.
Solid wire pushrods for throttle, ailerons and elevator.
Easy to assemble in just a few hours.
Warranty Period: Lanier warrants that for a period of ninety days, it
will replace any parts or material shown to the company's
satisfaction to have been defective at time of purchase.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
dural type aluminum main landing gear, 1/16" (2mm) tailwheel wire,
2" (52mm) main wheels, 1" (26mm) tailwheel, nylon adjustable engine
mount, 6 oz fuel tank, wood servo trays and wing joiners, hardware
package, wheel pants, clevises, photo-illustrated instructions.

REQUIRES: Engine: .40-.50 (2-stroke) or .48-.70 (4-stroke)
Engine mounts on its side, a pitts-style muffler is required.
Muffler: Pitts style depending on brand and size of selected engine.
Radio: 4 channel
Servos: 5 standard (2-ailerons, 1-rudder, 1-elevator, 1-thottle)
Servo Extensions 12": 2 (ailerons)
Y-harness: 1 (ailerons)
Misc. Items: 1/4" foam rubber padding, medium fuel tubing, propeller,
fuel, spinner, building and field equipment, 1/6 scale pilot.

SPECS: Wingspan: 64" (1626mm)
Wing Area: 625 sq in (29.06 sq dm)
Weight: 5-6 lb (2.25 -2.72kg)
Length: 35.75" (908mm) from firewall to fin post
Overall Length: 44.5" (1130mm) from spinner to tip of tail section
Airfoil: Semi-symmetrical, high wing
Center of Gravity: 3-1/4" (82mm) back from the leading edge of the
wing measured at the fuselage.
Control Throws:
Ailerons: Up & Down 3/8" (6mm)
Elevator: Up & Down 3/4" (13mm)
Rudder: Right & Left 1-1/8"(19mm)

Ég setti THUNDER TIGER 54 4T mótor og ekki skortir afl. Vélin var nokkuð auðveld í samsetningu, ekki neinar óvæntar uppákomur með kittið.
Annars bara skemmtileg vél í flugi og eftir að færslur á stýrum voru lagaðar (auknar :p ) er þetta bara gaman.

Mynd

Mynd

Mynd
Always remember you fly an airplane with your head, not your hands.
Svara